1 Description
WSPS-2450-1000Wsolid state generator provides max power of 1KW with center frequency 2450MHz. It adopts LDMOS device, solid state transistor and integrated circuits and mainly complete with sine-wave generator, amplifier units, gain-adjustment unit, forward and reverse power detection circuits, various protective circuits, human-computer interaction unit, power supply and cooling system to provide perfect performance and functions including
● High stability, reliability and excellent performance
● Remote real-time monitoring system provide functions of data detection, monitoring and auto-diagnosis.
● Easily install and maintain.
● Various protection of over-current, over-temperature, short circuit, VSWR etc.
2 Technical parameters
Ø Frequency ：2450MHz；
Ø Output Power：≥1000W；
Ø Output Impedance：50Ω；
Ø Power consumption：≤2500W；
Ø Power stability：≤3%；
Ø AC input power：100~240 VAC, single phase；
Ø Output signal format：CW, Pulse of choice
3 Mechanical parameters
Ø Dimension：544.5mm×426mm×128mm；
Ø Weight：typically 10Kg；
Ø Connector：L29；
Ø Cooling system：water cooling.
4 Function introduction
4.1 Control
Ø 1~1000W power adjustment；
Ø Amplifier enable control；
Ø CW and pulse switchover ；
Ø 0~360 degree phase adjustment；
Ø 30%~70% pulse duty cycle adjustment
4.2 Protection
Ø Over-temperature：when above70℃；
Ø Over-current：when more than 19A（single circuit module）；
Ø Over -VSWR：Long time open circuit
5 Panel introduction
5.1 Front panel
5.2 Rear panel
Connectors and interface on rear panel
Ø DB9 interface（RS232/485）：RS485；
Ø Water outlet for cooling system-based generator；
Ø RF OUT：RF power output interface；
Ø 110Vac-240Vac 15A Max：power supply outlet，three-core outlet connect to regular110V-240V AC power supply；
Ø Power switch：AC switch，ON means power on，OFF indicate power off；
Ø Water inlet for water cooling-based generator.
